Brief description of the product
A water soluble amber liquid that emulsifies greasy stains into soap during the cleaning process, which can be easily rinsed off with water, especially for cleaning concrete interfaces. It is particularly suitable for cleaning concrete interfaces. And it is very effective in the treatment of deep stains on the surface of the interface, such as grease and oil, wax stains, animal excrement and car tyre marks. The concrete interface cleaned by it, and then decorated with other external coatings will greatly improve its affinity and adhesion to the concrete interface, wood surface, metal surface, and asphalt interface, etc.
Application
Indoor and outdoor concrete interfaces, asphalt interfaces, concrete block surfaces, masonry surfaces, tile surfaces, wooden surfaces, metal surfaces, exposed real stone surfaces and exposed building mix surfaces (e.g. concrete and sandstone surfaces). It is an excellent cleaning agent for a wide range of industrial applications.
Preparation
Carefully sweep the surface layer of floating debris and scrape off the grease and oil from the floating layer before construction. Use plastic film to cover the surface vegetation or cladding that should be protected. The plants should be thoroughly watered with water before covering.
Preparation of the solution
Condition of the object to be cleaned: light contamination, general cleaning. For grease and oil, animal excrement and blood, which are particularly serious, a special cleaning process under pressure is required.
Construction steps
Sprinkle the solution evenly onto the working surface with a brush or plastic can and leave for 20 minutes to allow full penetration;
Scrape the surface with a strong, hard floor brush and then rinse thoroughly with water by connecting a soft water hose with a nozzle, repeat in the same way for areas that are difficult to clean at once until completely clean;
Make sure that the cleaned surface is completely dry before applying other coatings.
Material consumption per unit
1000 sq ft (93 sq m) per gallon maximum, depending on the water/solution dilution ratio, the severity of the floor contamination and leakage.
Technical data
Active ingredient percentage: 65; Viscosity: 58 K.U.
Cautions
Do not mix with other chemical solutions, do not take orally and do not store at special temperatures.
In case of accidental ingestion, do not induce vomiting, a doctor should be consulted promptly.
Avoid contact with eyes and skin, otherwise you may feel discomfort.
In case of accidental contact, rinse with water for about 10 minutes, if you still feel unwell, seek medical attention.
More YQXPOLYMER Epoxy Resin information, please contact us via email: sales@yqxpolymer.com, or voice to us at: +86-28-8411-1861.
Some pictures and texts are reproduced from the Internet, and the copyright belongs to the original author. If there is any infringement, please contact us to delete.