Epoxy anti-static flooring. Conductive coatings are applied to concrete and mortar floors or walls to obtain a beautiful, dustproof and easy-to-clean anti-static coating.
Scope of application: Ground or wall surfaces of electrical and electronic plants, computer rooms, printing factories, textile factories, etc. where anti-static or explosion-proof is required.
Performance characteristics: beautiful surface, not easy to accumulate dust, easy to clean; anti-static effect is long lasting and effective; strong adhesion of the coating and wear-resistant; ordinary type 0.2-0.5mm thick, self-levelling type 1.0-3.0mm.
Construction process: surface treatment, cleaning, vacuuming; painting closed primer; laying conductive copper platinum grounding; scraping conductive putty patching, coating conductive medium coating paint; grinding, vacuuming; coating anti-static top coat.
Material properties: abrasion resistance, <28mg (CS-17, 1000gf, 1000N); adhesion strength (>180N/cm2); impact resistance (1Kg-m); surface hardness (2H-4H); anti-static resistance 1×105-108 (ASTM F 150-98); surface gloss (matt or glossy); service life (10+ years for normal type, 20+ years for self-levelling type).
Water-based epoxy flooring.
Water-based epoxy mortar or colouring epoxy resin is applied on concrete or mortar with a special process to increase the strength, beautify the ground and facilitate cleaning.
Scope of application: food factory, pharmaceutical factory workshop and warehouse etc. The paint film is non-toxic and the coating process is non-polluting to foodstuffs and pharmaceuticals etc. It is also particularly suitable for wet ground coating.
Performance characteristics: all solvent-free water-based epoxy flooring materials, non-toxic, tasteless, no pollution during the coating process; beautiful coating, easy to clean, waterproof and moisture-proof; common type 0.2-0.5mm thick; mortar type 2.0-10 mm.
Construction process: surface treatment, cleaning, vacuuming; painting with water-based epoxy sealer primer; painting with water-based epoxy mortar layer or water-based epoxy middle coat; levelling, sanding, vacuuming; painting with water-based epoxy top coat.
Material properties: abrasion resistance, 24-28mg (CS-17, 1000gf, 1000N); adhesion strength (≥180 N/cm2); impact resistance (1Kg-m); surface hardness (2H-6H); surface gloss (matt or high gloss); service life (over 10 years for ordinary type, over 20 years for mortar type).
Epoxy glass build-up flooring. A composite coating made of coloured solvent-free epoxy resin and glass fibre cloth on treated concrete or mortar surfaces to resist erosion by corrosive media, increase strength and facilitate cleaning.
Scope of application: floors or walls of acid and alkaline pools, cesspools, drains with strong chemical corrosion or floors with strong impact.
Performance characteristics: good chemical resistance; resistance to humidity, heat and temperature changes, strong impact; good toughness, not easy to crack, easy to maintain; thickness 0.4-1.0mm.
Construction process: surface treatment, cleaning, vacuuming; paint solvent-free epoxy sealer primer; apply solvent-free epoxy adhesive, then lay glass fibre cloth, roller press, can be repeated 2-3 times.
Material properties: abrasion resistance, <28mg (CS-17, 1000gf, 1000N); adhesion strength (≥220 N/cm2); impact resistance (1Kg-m); surface hardness (2H-4H); surface gloss (matt or high gloss); service life (20 years).More YQXPOLYMER Epoxy Resins information, please contact us via email: sales@yqxpolymer.com, or voice to us at: +86-28-8411-1861.Some pictures and texts are reproduced from the Internet, and the copyright belongs to the original author. If there is any infringement, please contact us to delete.
